Secure Exit; Automatic Bypassing Of Sensors - Linear DEFIANT SSD Owner's Manual

SECURE EXIT

AUTOMATIC BYPASSING OF SENSORS

If the system is already in the Home Mode
and you want to exit the premises while
leaving someone inside with the system still
in Home Mode, press the [HOME] key for
two seconds.
A "gong" and two "beeps" will sound and the
HOME light will blink for 30 seconds.
You can leave through a door with a delayed
perimeter sensor during the 30 second Exit
Delay without causing the Console to begin
an Entry Delay.
NOTE: The Exit Delay time can be changed;
see the Advanced Programming section of
this manual.
The Console can be armed with open door
or window sensors.
The system will automatically "bypass" open
doors and windows after sounding four
high-low beeps to warn you that a protected
door or window is open.
Lit sensor status indicators show which
sensors are open.
Bypassed sensors cannot cause an alarm
until they are "restored" (closed).
If you close the door or window after arming
the system, the sensor will be restored and
can cause an alarm the next time it is
opened.
Automatic bypassing of sensors in the Home
Mode allows you to arm the system at night
with open windows, while still having
perimeter protection with other closed doors
and windows.
17