Dual Charger - Polycom SpectraLink 8020 User Manual

With session initiation protocol (sip)

Hide thumbs Also See for SpectraLink 8020:

Table of Contents

User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP

Dual Charger

The Dual Charger is designed to charge the Battery Pack in the

handset while it remains operational and also charge an additional

Battery Pack in the rear charging bay. The handset has charging

priority when both slots are occupied.

Place the handset in the front slot, facing forward. The Battery Pack

alone snaps into the charging bay as shown in the illustration.

The LED indicates the status of the Battery Pack in the rear bay. The

handset displays its charging status as described for the Single

Charger.

When the handset is fully charged or is removed, the Battery Pack

will begin charging.

Note that the time it takes for the Battery Pack to charge will be

lengthened if its charging cycle is interrupted for a handset to charge.

1725-36165-001-E.doc

Table of Contents

Do you have a question about the SpectraLink 8020 and is the answer not in the manual?

Spectralink 8030