Assign A Speed Dial Number - Polycom SpectraLink 8020 User Manual

1725-36165-001-E.doc
Using the Advanced Features of Your SpectraLink 8020/8030 Wireless Telephone
Make a speed dial call
1. From standby or while in the speed dial menu, press and hold the
corresponding number key on the keypad for one second. The
system speed dial key must be pressed for three seconds.
2. The handset will display the name and number for one second
before the call is dialed. You may press
terminate the call. (You may also use the Nav keys to highlight an
entry and then press
If you do not place a call, you may return to standby by pressing the
Exit softkey.

Assign a speed dial number

A phonebook entry may be assigned to a speed dial key from the
speed dial list or from the phonebook edit number display.
From the speed dial list:
1. Select the speed dial key that you wish to assign.
2. Press the softkey to open the phonebook list.
Set
3. Use the search routine or the
4. Press to assign the selected name to that speed dial key.
NavOK
5. Press again to exit to standby.
NavOK
END
or the softkey to dial the number.)
START Spkr
keys to select the desired entry.
Nav
during this second to
51