Polycom SpectraLink 8020 User Manual page 27

Config menu 2nd level
Push-to-talk † Default Channel
Subscribed
Channels
PTT Audio Volume
PTT Tone Volume
PTT Vibrate
Enable/Disable
System Info Phone IP Address
Alias IP Address
SVP IP Address
OAI IP Address
Firmware Version
Emergency Dial ‡
† (SpectraLink 8030 only) Push-to-talk must be enabled by the system administrator before it can be
activated by the user. If it is not enabled, then it will not appear on the Config menu. If PTT has not been
enabled, Emergency Dial may be. Check the System Info options to determine if Emergency Dial appears.
If so, it is active.
‡ (SpectraLink 8030 only) Emergency Dial will appear if it has been enabled by the system administrator.
The Emergency Number/Name options allow you to check the number and name that is dialed when the
Emergency Dial button is pressed twice in two seconds.
1725-36165-001-E.doc
Customizing Your SpectraLink 8020/8030 Wireless Telephone
3rd level 4th level
Channel 1
....
Channel 24
Channel 1
Channel 2
Channel 3
....
Channel 24
Audio Volume
Tone Volume
Emergency Number
Emergency Name
5th level 6th level
27