Using The Barcode Reader; Using The Dual Charger - Polycom 8400 Series Quick Start Manual

Using the Barcode Reader (8450 only)
The barcode scanner is located at the top rear of the 8450
handset. It is used in conjunction with an on-board application or
a PC-based application. See your system administrator, or
consult your User Guide for complete information.
Barcode reader

Using the Dual Charger

The Dual Charger is an optional accessories. (See
on page 20.)
You can use the Dual Charger to charge the Battery Pack in an
operational handset while also charging a spare Battery Pack in
the rear charging slot (as shown next).
Barcode reader
scan button
Accessories
16
Battery Packs should be fully charged before first use.
Two LED's on the front of the Dual Charger indicate charging status:
Spare Battery
Pack charging
slot
Handset
charging slot
LED Battery Pack charge
Blinking Charging
Solid green Fully Charged
Off Not seated or empty
The charging icon on the handset indicates the charging status of
the Battery Pack in the handset.
Battery Pack
charge LED
Handset charge
LED
Handset charge
n/a
Properly seated
Not seated or empty
Battery Pack charging,
handset in charger
Battery Pack fully charged,
handset in charger
17