Adjust The Headset Volume; Mute/Unmute A Call; End A Call; Change The Profile - Polycom SpectraLink 8020 User Manual

User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP

Adjust the Headset Volume

Mute/Unmute a Call

End a Call

Change the Profile

Open the Config Menu

Turn on the Backlight

44
While the headset is plugged in, press the up/down volume buttons
on the side of the handset during the call.
Press the softkey. When the handset is muted, the audio flowing
Mute
icon changes to the audio receive-only icon
softkey again to restore audio pickup.
Press the softkey to maintain the active mode and view the active
End
calls. Press the key on the keypad to return to the standby mode.
END
Press the softkey and use the
Prof
while in standby mode. The selected profile is marked with an
asterisk ( ).
*
Press the softkey from standby mode.
Cfg
The backlight comes on when any key is pressed or when there is an
incoming call, and stays on for 60 seconds. It turns off if another key is
not pressed within that period.
. Press the
keys to select a new profile
Nav
1725-36165-001-E.doc
Mute