Ring Settings - Polycom SpectraLink 8020 User Manual

User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP
30

Ring Settings

The Ring Settings option allows the user to set the ring for three
separate functions.
Telephone Ring
functions.
Message Alert 1
different ringing patterns for custom applications.
Telephone Ring
The telephone ring setting allows the user to set a distinctive ring
rhythm, tone, volume and sequence. Select from an audible ring, a
vibrate-only ring or a vibrate ring accompanied by an audible ring.
The ring cadence is the rhythm of the ring. It may be set
Ring Cadence
to a pre-programmed ring cadence, or it may be set to obtain its
cadence from the SIP proxy server. The PBX option is designed to
utilize any distinctive rings sent by the proxy server while allowing
the user to set unique rings for auxiliary applications.
: Silent
Off
: The PBX, also known as the SIP call server, determines ring
PBX
cadence (e.g. the call server may send rings that differentiate
between internal and external calls)
: Rings continually until answered
Continuous
: Rings in short bursts
Short Pulse
: Rings in long bursts
Long Pulse
Scroll and select from ten available tones. The
Ring Tone
allows the user to preview the tone before selecting. If Ring Cadence
is turned off, the Ring Tone option will not appear on the menu.
Use the
Ring Volume Nav
or press the up/down volume buttons on the side of the handset
during ringing. If Ring Cadence is turned off, the Ring Volume option
will not appear on the menu.
Vibrate Cadence options are the same as for Ring
Vibrate Cadence
Cadence (see above).
Ring Delay determines how long the vibrate cadence will
Ring Delay
play before the audible ring starts. If Ring Cadence is turned off, the
Ring Delay option will not appear on the menu.
is used for usual telephony
and may be used to set
Message Alert 2
keys to change the Ring Volume setting,
softkey
Play
1725-36165-001-E.doc