Configuring 802.11B/G Radio Communications; Configuring Bluetooth Communications - Intermec CK3n User Manual

Configuring 802.11b/g Radio Communications

Configuring Bluetooth Communications

CK3 Mobile Computer User's Manual
• Ethernet communications
• USB and serial communications.
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.
Your CK3 has an 802.11b/g radio to transfer data using wireless
communications. This section assumes that your wireless network is
set up, including your access points.
To configure 802.11b/g radio parameters
1 Tap Start > Settings > the Systems tab >Intermec Settings.
2 Tap Communications > 802.11 Radio > Funk Security >
[Profile #] > SSID.
3 Enter your SSID (network name).
4 If you are not using DHCP, tap IP Settings and configure your
network settings.
5 Make sure that your CK3 is talking to the network and that the
network can see your CK3.
6 Configure security. For help, see
Security" on page
You CK3 is Bluetooth™-enabled, which lets you connect to other
Bluetooth devices, such as:
• scanners.
• printers.
• audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
Chapter 2 — Connecting and Configuring the CK3
"Configuring Wireless
37.
29