Intermec CK3n User Manual page 70

Chapter 3 — Developing and Installing Applications
60
To create and install the AutoRun.dat file on your computer
1 Create a folder called System on your CK3.
2 On your PC, open the Notepad application.
3 Write commands for AutoRun.dat using the supported AutoRun
script commands. For help, see the next table.
4 Save the Notepad file as AutoRun.dat.
5 Copy the AutoRun.dat file to the System folder on your CK3.
During every boot, the system scans for AutoRun.dat in the
System folder.
AutoRun supports the following script commands in AutoRun.dat.
AutoRun Script Commands
Command Description
EXEC Launches a specified program and waits for it to finish (up to 10
minutes).
CALL Processes a specified file of commands and returns.
CHAIN Processes a specified file of commands and does not return.
RUN Loads and runs a specified program.
LOAD Loads and runs a specified program.
AutoRun handles quoted file names for the first parameter, which
allows you to specify path names or file names that contain white
spaces. AutoRun only supports one set of quotes per command.
CK3 Mobile Computer User's Manual