Chapter 1 — Using the Computer
20
•
Choose a Predefined mode in Intermec Settings:
a Tap Start > Settings > the System tab > Intermec Settings.
b Tap Data Collection > Internal Scanner > Imager Settings >
Predefined Modes and then select one of these options:
Predefined Mode
1D
1D and 2D
Standard
1D and 2D Bright
Environment
1D and 2D
Reflective Surface
Custom
•
If you are scanning multiple bar codes in a small area, use one of
these parameters:
•
Aiming beam activation
•
Aim triggering mode
•
Center decoding
To enable these parameters, use Intermec Settings. For help, see
"Configuring the CK3 With Intermec Settings" on page
For help scanning using center decoding, see the next procedure.
To scan a bar code using center-decoding
1 Press
to turn on the CK3.
2 Point the scanner window at the bar code label.
3 Press the Scan button or pull the trigger. The illumination beam
and the laser pointer appear.
Select if You Are Scanning:
Only 1D labels.
All types of bar code labels.
In high ambient light, such as outdoors in the
sunshine.
Glossy labels.
In conditions that require customized settings.
For more information about these settings,
commands, and parameters, see the Intermec
Settings Command Reference Manual available from
the Intermec web site at www.intermec.com.
CK3 Mobile Computer User's Manual
27.