Upgrading The Ck3 Using A Microsd Card - Intermec CK3n User Manual

Chapter 3 — Developing and Installing Applications

Upgrading the CK3 Using a microSD Card

62
To use a microSD card to upgrade the computer, you need an SD card
reader and a microSD adapter card formatted as FAT16.
To upgrade the operating system using a microSD card
1 Insert a microSD card into a microSD adapter card and then place
it in the storage card reader connected to your PC.
2 Copy all required OS upgrade files to the microSD card.
3 Remove the microSD card from the adapter card and insert it into
the CK3.
4 Place the CK3 in a dock connected to external power and press the
Reset button (using a stylus) located in the battery cavity on the
back of the CK3. For help, see
page 73.
5 Remove the microSD card when the Installation Complete menu
appears.
6 Remove the CK3 from the dock and replace the battery.
To upgrade the SSPB using a microSD card
1 Insert a microSD card into a microSD adapter card and then place
it in the storage card reader connected to your PC.
2 Copy all required SSPB upgrade files to the microSD card.
3 Remove the microSD card from the adapter card and insert it into
the CK3.
4 Using the stylus, press the Reset button in the battery
compartment.
5 Press and hold
6 Continue to hold
7 Release , read the message, and press either button on the right
side to continue.
8 Perform the screen alignment and wait for the CK3 to load files
from the microSD card.
When the progress is complete, the CK3 warm boots to reset the
configuration.
"Cold Booting the CK3" on
as you insert the battery back into the CK3.
until a Warning message appears.
CK3 Mobile Computer User's Manual