Scanning With An Area Imager; Scanning With The Extended Range Area Imager - Intermec CK3n User Manual

Chapter 1 — Using the Computer

Scanning With an Area Imager

18
Your CK3 may come with one of two types of area imagers:
• Extended range area imager
• Near-far range area imager
Both area imagers are equipped with a laser pointer to help you aim at
bar codes, allow you to scan 2D bar code symbologies, and support
omni-directional (360°) scanning. Omnidirectional scanning lets you
position the CK3 in any orientation to scan a bar code label.

Scanning With the Extended Range Area Imager

1 Press to turn on the CK3.
2 Point the scanner window at the bar code label, and hold the CK3
steady a few inches from the label.
3 Press the Scan button or pull the trigger. The laser pointer and
illumination beam and frame appear.
4 Use the laser pointer as a guide and aim toward the middle of the
bar code. Make sure that the illumination frame covers the bar
code you are trying to decode.
Good read LED
Scan button
Laser pointer
CK3 Mobile Computer User's Manual