Capitalizing Characters; Using The Power Button; Configuring The Backlight Settings - Intermec CK3n User Manual

Capitalizing Characters

Using the Power Button

Configuring the Backlight Settings

CK3 Mobile Computer User's Manual
You can capitalize characters individually, or you can type all capital
letters by enabling Caps Lock.
To capitalize a single character
On the alphanumeric keypad, press the
•
key to select the Shift function. Press the
character.
• On the numeric keypad, press the
select the Shift function.
To enable Caps Lock
• On the alphanumeric keypad, press
again to disable the Caps Lock.
• On the numeric keypad, press
The Caps Lock LED lights up green to show that the CK3 is in the
Caps Lock mode.
To disable Caps Lock
• Press the color modifier key again.
For information on how to enter specific characters with keystrokes,
see Appendix C, "Keypads and Keystrokes" on page
When you press the Power button (
mode. In this lower power mode, the CK3 continues to supply power
to all memory, but turns off power to most hardware such as the
display. This power-saving feature is designed to prolong battery life.
By default, the CK3 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
Chapter 1 — Using the Computer
key, and then the
key, and the
key, and then the key to
, then the key. Press
.
105.
), you put the CK3 into suspend
9