Launching An Application Automatically - Intermec CK3n User Manual

Launching an Application Automatically

CK3 Mobile Computer User's Manual
8 Tap Yes to continue with the clean boot. The computer performs a
clean boot and restarts with all of the checked components
installed.
InstallSelect Software Components
Component Name Description
Data Collection & Data collection and Intermec Settings. Also includes
Intermec Settings on-unit SDK libraries.
If you disable this .cab file, you cannot scan or collect
data on the device and you cannot use Intermec
Settings.
Funk Wireless Intermec security supplicant that provides a wireless
Security security solution with several features that are not
supported by Microsoft.
Printer Support Provides Intermec printer driver support.
Intermec DHCP Provides the Intermec DHCP client application.
Client
Bluetooth Provides the Intermec Bluetooth application support.
Avalanche Enabler Enables the client to the Wavelink Device Management
solution.
Depending on the options you selected for your CK3, you may see
other components available from the InstallSelect application.
There are two ways to automatically launch your application when
you perform a reset on the computer:
• Make sure your .cab file places a shortcut to your application in
the \Windows\StartUp folder.
• Configure AutoRun.exe to launch your application.
AutoRun.exe automates operations on your CK3. You can configure
AutoRun.exe through the AutoRun data file (AutoRun.dat). For
compatibility with other Intermec computers, you can place a copy of
AutoRun.exe in the same folder as your AutoRun.dat file.
Chapter 3 — Developing and Installing Applications
59