Table of Contents
Advertisement
About the IE-MultiWay
The IE-MultiWay is an SNMP manageable standalone device providing two fixed
10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports support fiber or
copper SFPs. As a plug and play device, the IE-MultiWay provides several distinct
modes of operation to support a wide range of applications. The IE-MultiWay
provides OAM functionality with 802.3ah (LINK-OAM ah) and 802.1ag (SERVICE-
OAM ag) supported on each
bytes as well as AutoCross on the copper ports. Power options for the IE-MultiWay
include both a standard low voltage wall transformer and a Power Block for Office
Battery or a DC Power Supply connection. As an Industrial Ethernet device, it
supports an extended temperature range of -40°C to +85°C. A console port and a
DIP Switch bay provide configuration options.
The IE-MultiWay can be directly managed, because it contains on-board logic.
Management capability is available if the device has firmware version 123-00A1 or
higher, which can be downloaded from the IMC Networks site. iView
software, posted on the website under Support/Downloads. Please refer to page 4
for details.
The IE-MultiWay requires two small form-factor (SFP) modules which provide greater
flexibility in the network environment. The hot-swappable nature of the SFPs,
available in dual strand for Multi Mode and Single Mode, and single strand fiber types
for Single Mode, allow for easy configuration and future upgrading as network
demands evolve. The SFP modules must be MSA-compliant and both DDMI and
non-DDMI are
supported.
the copper SFPs support 10/100/1000Mbps and 1000Mbps.
SFPs are sold separately by IMC Networks and meet Class 1 Laser Safety Standard.
IE-MultiWay Features and Configuration
The IE-MultiWay offers a full feature set including Auto Negotiation, Selective
Advertising, AutoCross, VLANs, SNMP management, loopback testing and OAM. Unit
software updates can be downloaded through TFTP or iView
IE-MultiWay features include:
•
SNMP manageable
•
OAM AH
IEEE 802.3ah Link OAM for per port monitoring (OAM AH)
o
port.
It supports jumbo frame sizes of up to 10,240
The fiber SFP can support 100Mbps or 1000Mbps; while
1
2
is a free
2
(iConfig view).
Advertisement
Table of Contents
