Page of 104
Download Print This PagePrint Bookmark Comment

Korg Kaossilator Pro+ Owner's Manual: Saving To Sd Card; Loading From An Sd Card

Dynamic phrase syntesizer/loop recorder.
Hide thumbs

Saving to SD card

Here's how you can save the loop recorder
data, program memories, and all settings onto
an SD card.
1. Hold down the SHIFT button and press the
PROGRAM MEMORY 3 (SAVE) button.
2. Use the PROGRAM/BPM knob to select the
type of data that you want to save.
,
3. Press the PROGRAM/BPM knob; the dis-
play will show the file numbers (0–9, or 0–99 for
loop recorder data) that can be saved. Use the
PROGRAM/BPM knob to select the file number
in which you want to save the data.
A new file will be added.
The data will overwrite an existing file (in
this case, file 1).
There is an identically-named file or folder
that cannot be rewritten.
4. To perform the Save operation, press the
PROGRAM/BPM knob, then use the PRO-
GRAM/BPM knob to select
finally press the PROGRAM/BPM knob. When
saving is complete, the display will indicate
(End.) Press the SHIFT button to return
to the program indication.
Never turn off the power or remove the SD card while
data is being saved. Doing so may render the SD card unus-
able.
TIP: If the SD card is protected, the display will indicate
"Prct" and it will not be possible to save. Remove the
card, turn off write protect, and try the procedure
again.
Loop recorder data
Contents of program
memory
MIDI, pad LED, and utility
setting data file
The contents of
"LoP.A"–"LoP.D", "Prog," and
"GLob" combined in a single
file
kaossilator2 loop recorder
data set
kaossilator2 loop recorder
data files
(Yes), and
Loading from an SD card
Here's how you can load data from an SD card.
1. Hold down the SHIFT button and press the
PROGRAM MEMORY 2 (LOAD) button.
2. Use the PROGRAM/BPM knob to select the
type of data that you want to load.
,
3. Press the PROGRAM/BPM knob; the dis-
play will show the file numbers (0–9 or 0–99)
that can be loaded. Use the PROGRAM/BPM
knob to select the number that you want to load.
TIP: For WAVE files and AIFF files, the KAOSSILA-
TOR PRO+ will recognize only files whose name con-
sists of a two-digit number with a file extension, such
as "00.wav" or "99.aif." If .wav and .aif files with the
same two-digit number exist, the WAVE file will take
priority.
4. Press the PROGRAM/BPM knob, then use
the PROGRAM/BPM knob to select
(Yes), and finally press the PROGRAM/BPM
knob again to perform the Load operation.
When loading is complete, the display will indi-
cate
(End.) Press the SHIFT button to
return to the program indication.
Loop recorder data
A WAVE or AIFF file
Contents of program memory
MIDI, pad LED, and utility
setting data file
The contents of
"LoP.A"–"LoP.D", "Prog," and
"GLob" combined in a single
file
kaossilator2
loop
recorder
data set
kaossilator2
loop
recorder
data files

Advertising

   Related Manuals for Korg Kaossilator Pro+

Comments to this Manuals

Symbols: 0
Latest comments: