Figure 3.19: Fault Relay Alarm; Table 3.18: Utc Timezone - Advantech EKI-7659CPI User Manual

SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows you to
synchronize switch clocks on the Internet.
SNTP Client: enable or disable SNTP function to get the time from the SNTP server.
Daylight Saving Time: enable or disable daylight saving time function. When daylight saving time is
enabled, you need to configure the daylight saving time period.
UTC Timezone: set the switch location time zone. The following table lists the different location time
zone for your reference.

Table 3.18: UTC Timezone

Local Time Zone
November Time Zone
Oscar Time Zone
ADT - Atlantic Daylight
AST - Atlantic Standard
EDT - Eastern Daylight
EST - Eastern Standard
CDT - Central Daylight
CST - Central Standard
MDT - Mountain Daylight

Figure 3.19: Fault Relay Alarm

Conversion from UTC
- 1 hour
-2 hours
-3 hours
-4 hours
-5 hours
-6 hours
49
Time at 12:00 UTC
11am
10 am
9 am
8 am
7 am
6 am
Chapter3