Table of Contents
Advertisement
2.4.
Configuring Interfaces
The printer is equipped with both a parallel and serial interface. Independent settings can
be made for each interface. Optional interface can also be installed.
To configure each interface, press the MODE key and use the + or – key to select the interface
you wish to make settings for.
This interface selection does not select which interface data will be received from.
The printer automatically selects that interface.
Parallel Interface
The parallel interface mode of this printer supports a bi-directional/high-speed mode. Nor-
mally, this interface is used under the default settingý$XWR, see Appendix C. After setting
the interface, be sure to reset the printer or turn the power off at least once. The new setting
will be enabled thereafter.
2.4. Configuring Interfaces
2-17
Advertisement
Table of Contents
