Table of Contents
Advertisement
2.2. Operating Procedures
Feed Selection
Use the FEED key to select whether to feed paper from the paper feed cassette or the MP tray.
If optional paper feeder (PF-26) is installed, any of these can also be selected.
The FEED key can be used whenever the message display indicatesý5HDG\ orý$GGý
SDSHU.
Press the FEED key. The selection cycles and is momentarily displayed in the message dis-
play as:
&DVVHWWHýì
&DVVHWWHýë
&DVVHWWHýê
03ýWUD\
The cassette indicator corresponding to the
selected cassette on the control panel will flash.
Selecting the optional paper feeder (PF-26) cas-
sette will also light the ready indicator on the
front of that cassette.
Paper feed selections can also be made using the
PRESCRIBE 2e PSRC command.
Switching Online/Offline
After printing starts, it is possible to interrupt printing to check whether the print job is
coming out as anticipated.
Pressing the ON LINE key during data processing will cause the ON LINE indicator to go out
and pressing it during printing will cause the printer to stop after the page currently being
printed is finished. During processing means anytime the messagesý3URFHVVLQJ,ý
:DLWLQJ or )RUP)HHGý7LPH2XW are being displayed in the message display.
The printer continues to receive data even while the printer is offline while the messageý
3URFHVVLQJ is displayed.
Press the ON LINE key to bring the printer online again. The printer will come online and the
ON LINE indicator will light.
Read the section below on how to cancel printing.
2-8
(Paper feeder's cassette)
(Displayed when an optional feeder is installed)
(Displayed when a second optional feeder is installed)
(Printer's MP tray)
MP (multi-purpose) tray indicator
Cassette indicator
Advertisement
Table of Contents
