Setting Up And Interfacing - Kyocera FS-6900 User Manual

1.4. Setting Up and Interfacing

1.4. Setting Up and Interfacing
Before you can use the printer for the first time, you must set up the printer by installing
the printer components and interfacing with the computer. The steps to be followed in set-
ting up are:
1—Open the top cover.
2—Install the toner container.
3—Close the top cover.
4—Install the waste toner bottle.
5—Adjust the paper guides of the paper cassette.
6—Add paper.
7—Open the paper stopper on the face-down output tray (if required).
8—Install the face-up output tray (sold separately).
9—Connect the printer to the computer.
10—Attach the power cord.
11—Print a status page.
12—Test the interface with the computer.
13—Set the emulation mode.
14—Install the printer driver.
1-8