Table of Contents
Advertisement
1.5. MP (Multi-Purpose) Tray Feeding
3.
Adjust the paper guides to the size of the
paper being fed.
4.
Check that the printer isý5HDG\.
5.
Press the FEED key until the message display
indicatesý03ýWUD\ and the MP tray indica-
tor on the printer symbol flashes, andý$GGý
SDSHU appears on the message display.
6.
Load the paper.
7.
Press the MODE key and then the + (output select) key or – (paper feed select) key several
times to displayý3DSHUýKDQGOLQJý!.
key and then the + key or - key several time to displayý!03ý WUD\ýPRGH.
8.
Press the
9.
Set the mode. For the procedure for setting each mode, see the settings for each mode
given below.
key to displayý !03ý WUD\ý VL]H, then by pressing the ENTER key, the size
10.
Press the
of the paper that will be fed from the MP tray will be set for a list of paper sizes which
can be set, see page B-4. For a depiction of the menu display hierarchy, see the menu
hierarchy given at the end of this manual.
Paper jams or improper printing may occur if the paper size setting and MP tray size
setting do not match. In addition, it is necessary to select either vertical feed (A4, Let-
ter) or horizontal feed (A4-R, Letter-R) from the control panel when using A4 size or
letter size paper.
The following pages explain the use of the MP tray in the First Mode and Casette Mode.
1-24
Paper Guides
Limitation mark
Advertisement
Table of Contents
