Formatting A Memory Card - Kyocera FS-6900 User Manual

Formatting a Memory Card

It is necessary to first format a new memory card before it can be used by the printer. For-
matted a memory card can then be written with data.
‹
Note that if you format a memory card which already has data written on it, that
data will be lost entirely.
‹
Check that the memory card can be written (that write-protection is released).
1.
Bring up the menuý!)RUPDW on the message display.
2.
Press the ENTER key.ý" will appear.
3.
Pressing the ENTER key again will causeý3URFHVVLQJ to appear in the message dis-
play and the memory card will be formatted.
The printer will print memory card formatting information (example below) after ini-
tialization is finished. Use this to check that the memory card has been formatted prop-
erly.
Slot number:
Card size:
Data size:
Remaining Size:
After this information is printed, the message display will return toý5HDG\.
Slot name for the memory card (only A is supported)
The overall memory capacity of the card (in units of bytes)
The amount of data available to the system
The remaining amount of available memory on the memory card
2.9. Memory Card
2-31