Table of Contents
Advertisement
1—Open the Top Cover
1.
Remove the packing tape from the printer.
2.
Open the printer top cover all the way.
2—Install the Toner Container
1.
Take the toner container from the toner kit.
2.
With the side where the toner kit name and
precautions are printed facing down, thor-
oughly shake the toner container (in the
direction of the arrow) ten times or more to
loosen and mix the toner inside.
3.
The bottom of the toner container is sealed
with a sealing strip. Peel off the seal on the
toner container and carefully pull off and
dispose of the sealing strip.
Be sure to peel the seal off the toner con-
tainer before the toner container is fitted
into the developer unit.
4.
Install the toner container on the developer
as shown in the figure.
1.4. Setting Up and Interfacing
Developer
Unit
Top Cover
Toner Container
Sealing Strip
1-9
Advertisement
Table of Contents
