About Using A Microsd Card - Icom ID-31A Instruction Manual

2

ABOUT USING A MICROSD CARD

■ About using a microSD card
D Usable microSD cards
A microSD or microSDHC card is not supplied with the
transceiver. Please purchase a desired card to use.
Icom has checked compatibility with the following microSD
and microSDHC cards, shown in the table.
Maker
®
SanDisk
* If the large capacity card is used, the transceiver takes
extra time to recognize the card.
BE CAREFUL! While reading or writing data from and to
the card, NEVER turn OFF the transceiver. It will corrupt
the data or damage the card.
Also be careful in the following cases:
• When using the transceiver with the BP-273 battery case,
and the batteries are near exhaustion.
• When using the transceiver with an external DC power
source and the battery pack is not attached, then the ex-
ternal power is turned OFF.
3
(As of January 2014)
Kind of the card Capacity*
microSD 2 GB
4 GB
8 GB
microSDHC
16 GB
32 GB
D Contents that can be stored onto a card
The transceiver has a slot for a microSD card to store memo-
ry contents, transceiver settings, GPS information, and other
data. Following data can be stored onto the card.
• Memory channel contents
• Repeater list
• Transceiver settings
• Received communication activity (audio)
• Voice audio to use with the Auto Replay function in the
DV mode
• Position and time data from a GPS receiver that is in a log
file as a route