Recording A Qso Onto A; Microsd Card; About The Microsd Card - Icom ID-52A Basic Manual

6
RECORDING A QSO ONTO A microSD CARD

■ About the microSD card

NOTE: The microSD and microSDHC cards are not available from Icom (User supplied).
A microSD card of up to 2 GB, or a microSDHC of up to 32 GB, can be used in this
transceiver. Icom has checked the compatibility with the following cards.
(As of October 2020)
Brand
SanDisk
®
microSDHC
TIP: Saving the factory default data is recommended. (p. 9)
([MENU] > SET > SD Card > Save Setting)
NOTE:
• Before using the microSD card, thoroughly read the instructions of the card.
• If you do any of the following, the card data may be corrupted or deleted.
- You remove the card from the transceiver while accessing the card.
- You change the external power supply's voltage while accessing the card.
- You drop, impact, or vibrate the card.
• DO NOT touch the contacts of the card.
• The transceiver takes a longer time to recognize a high capacity card.
• The card will get warm if used continuously for a long period of time.
• The card has a certain lifetime, so data reading or writing may not be possible after using it
for a long period of time.
• When reading or writing data is impossible, the card's lifetime has ended. In this case,
purchase a new one. We recommend you make a backup file of the important data onto
your PC.
• Icom will not be responsible for any damage caused by data corruption of a card.
25
Type Memory size
microSD 2 GB
4 GB
8 GB
16 GB
32 GB
L The performance of the cards listed to the
left is not guaranteed.
L Throughout this document, the microSD
card and microSDHC card are simply called
the microSD card or the card.
L Before using the microSD card, format it
using the transceiver, even a preformatted
card for PCs or other uses. (p. 8)