Icom ID-31A Instruction Manual page 57

NOTE: The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
Sounds In this item, set the Sound
Beep Level
Beep/Vol Level Link
Key-Touch Beep
Scan Stop Beep
Standby Beep
Scope AF Output
Time Set In this item, set the Time
Date/Time
GPS Time Correct
UTC Offset
Auto Power OFF
options.
RANGE OR VALUE (Default is shown in bold)
0~3~9
OFF or ON
OFF or ON
OFF or ON
OFF, ON or ON (to me:High Tone)
OFF or ON
options.
RANGE OR VALUE (Default is shown in bold)
OFF or Auto
–14:00~±0:00~+14:00
OFF, 30min, 60min, 90min or 120min
MENU SCREEN OPERATION
DESCRIPTIONS
Sets the beep output level.
Selects whether or not the beep output
level can be adjusted by the [VOL] control.
Turns the confirmation beep tones when
key is pushed, ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the
DV mode ON or OFF.
Selects the audio output capability during
a sweep by the Band Scope function.
DESCRIPTIONS
Sets the current date and time.
Selects if the time data is automatically
corrected by a received GPS sentence.
Enters the time difference between UTC
and the local time.
Turns the Auto power OFF function ON
or OFF.
☞ Continued on the next page.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
48