Front Panel - Dynacord DMM 4650 Owner's Manual

1. INPUT MIC
XLR-socket for the connection of a microphone when
recording a message. By using a short test-sample,
the level is automatically adjusted and the setting is
saved.
This input can also be used for making announcements.
2. INPUT LINE
RCA-type sockets for the connection of stereo or
monaural audio signal sources (tape deck, CD player)
when recording a message. A wired in parallel OdBu
socket on the rear panel is also provided. By using a
short test-sample, the level is automatically adjusted and
the setting is saved.
This input can also be used for making announcements.
3. PHONES
Stereo phone jack 1/4" (6.3 mm) to pre-listen to
messages, gong and alarm signals via headphones.
Wired in parallel, a OdBu socket is provided on the rear
panel.
4. Multi-function Display
Back-lit LC display, 2 lines with 16 characters, each.
The display lights up by pressing any key.
The display is dimmed whenever the EXIT-key gets pres-
sed or no key is pressed for at all within a short while.
5. SOFT KEY
Depending on the selected operation mode, the soft keys
are used in various ways. The according function is
indicated on the display.
6. CURSOR
CURSOR-keys to control the cursor on the display and
for modifying data.

FRONT PANEL

7. RECORDER
Keys for ...
TITLE skip back, REWIND, PLAY/STOP, REC, FAST
FORWARD, TITLE skip forward.
8. EXIT
Key for exiting the edit mode in order to prevent
unauthorized operation. Each pressing of the key switches
back one menu stage.
9. POWER
The LED lights whenever the DMM 4650 is ready for ope-
ration. In case the LED BLINKS you should contact a
DYNACORD service center.
6