List Of Remote Commands - Dynacord DMM 4650 Owner's Manual

The Backing-up process runs with lowest priority and can be interrupted by other sequences at any time. If this is
supposed to be avoided, interrupting sequences are blocked by entering the user3 password (high priority). If the
backup is expected to take very long ("backup message'), start "System setup > Restore > ok" after entering the
password, in order to prevent the time-dependent switching-off of the operation.
RESTORE stores the data received via the DMM 4650's REMOTE interface into the stated preset memory. In or-
der to prevent the current memory from being inadvertently overwritten, it is necessary to previously allow this
mode in the menu "System setup > Restore > ok" The DMM 4650 confirms the successful restoration by displaying
the message "Preset xx restored".
List REMOTE - commands
Separation command - parameters are separated by a blank character.
The execution takes place after a line feed command (Return) at the end of a line.
Parameter in [ ] are optional
Bold characters describe factory default settings
Cancel the data transfer with Strg+C
Command Parameter
backup [ ] [status]
backup message
baud [nnnnn]
date [TT.MM.JJ]
list Axx
Gxx
...
restore Axx cccccccc
Gxx cccccccc
...
time [ ] [hh:mm:ss]
ver
*
answer [on] [off]
echo [] [on] [of f]
linefeed [] [on] [of f]
prompt [] [on] [of f]
?
Help
Definitions:
nnnnn 300 in steps up to 38400
DD.MM.YY day.month.year
xx preset number
ccccccc data
hh:mm:ss hours : minutes : seconds
The DMM 4650 sends device status (System setup), preset gong, alarm,
sequences,stop trigger, trigger
The DMM 4650 sends device status (System setup), preset gong, alarm,
sequences, stop trigger, trigger and the audio data stored in the message memory
(flash memory)
shows current baud rate, or sets the DMM 4650's baud rate to a new value
shows the current date, or sets the date to a new value
The DMM 4650 transfers the selected presets' data to the PC in plain text.
For documentation, it is possible to print the presets' contents via the PC
for further information see help command
The DMM 4650 stores the data into the stated memory (the correct format is
determined by the backup)
for further information see help command
shows current time, or sets the time to a new value
The DMM 4650 transmits the the software revision number
subsequent characters are ig nored by the DMM 4650 (comment)
the answer of the DMM 4650 is switched on or off, or the current status is being
displayed
the output of the received characters is switched Qn (echo) or off, or the current
status is being displayed
the output of an "empty line" after command execution is switched Qn or off, or the
current status is being displayed
tihe output of the character string "DMM 4650" after command execution is
switched on or oft, or the current status is being displayed
Help function, displays a listing of the commands
Help function, displays a listing of the commands
Function
34