Outputs; Installation Example; Inputs - Dynacord DMM 4650 Owner's Manual

Outputs:

Max. output current (relay contacts):

Installation example:

Installation example with factory presets: see also "Factory preset sequences" page 36 - 44

INPUTS:

All input signals must be applied longer than 200 msec. in orderto be securely recognized. Modifying this default is
possible in the menu "Trigge@'.
Al Release signal:
A2 General Stop:
A3 Alarm text:
A4 DIN alarm:
Bl DIN alarm:
B2 DIN alarm text:
B3 4-tone gong:
B4 Pre-gong:
OUTPUTS:
All outputs are floating relay contacts.
Al System on:
A2 Alarm text running:
A3 Alarm signal running:
A4 4-tone gong running:
Bl Pre-gong running:
B2 Mandatory relay E:
B3 Mandatory relay D:
B4 Program off:
Input for re-confirmation signal, whether the unit (power amplifiers) is ready
Input (impulse); interrupts all currently running sequences
Input (impulse) for playback alarm message (MOO)
Input (impulse) for infinite DIN alarm (siren 1200 Hz - 500 Hz).
Key pressed for DIN alarm on, key released terminates the alarm
Key pressed starts sequence, DIN alarm, 1 sec pause, alarm text (MOO),
1 sec pause, DIN alarm, etc., key released terminates the sequence.
Input (impulse) starts a 4-tone gong (G20).
Input (static), key pressed starts pre-gong and enables announcement via
DMM 4650, key released terminates the sequence.
Switches on the electro acoustics sound reinforcement system.
Signaling contact for alarm text active.
Signaling contact for alarm signal active.
Signaling contact for 4-tone @g active.
Signaling contact for pre-gong active.
Switches the sound reinforcement system to mandatory reception (E).
Switches the sound reinforcement system to mandatory reception (D).
Switches current music program off.
1A at 24VDC
0.5A 5OVDC
31