Dynacord DMM 4650 Owner's Manual page 40

Sequence Nummer
S 28
Step Command Parameter
1: Out Cl set
2: sum=
3: DMM= -2dB
4: start M 02
5: wt Audio
6: end
Sequence Nummer
S 29
Step Command Parameter
1: out C3 set
2: Record M 01
3: Out C2 set
4: Dly= 010,0 s
5: if Stop
6: NOP
7: IF Stop
8: Jump
9: if Delay
10: Jump
11: if Audio
12: End
13: Jump
14: Finish
15: Out C2 clr
16: Jump
Title
"Message2"
Start Message 2
Description: Closing the signaling contact (Cl = message runs)
off switches the audio controls to the priority of the message. After
the message is finished the DMM 4650 returns to the stand-by
mode.
Title
"EasyRecl"
Starts the recording of Message 01 (remote recording),
starts by briefly pressing the input C3 button (menu trigger),
stops by pressing the input C3 button again
Description: Closing the signaling contact (C3 = remote recording
runs) starts erasing the message. After successful erasing the
signaling contact C2 (=start recording) is being closed. The
recording is terminated by switching the control input C3 (current
14 input C3 on). If the termination of the recording mode is not
recognized, the maximum duration is limited to 1 0 sec. Name and
14 priority of the message stay unaltered and the DMM 4650
returns to the stand-by mode.
07
11
Priority
80
Priority
80
40
Stopp trigger
off
stopp trigger
C3 High >00,ls lat