Dynacord DMM 4650 Owner's Manual page 19

Type Jump sound
frequencyl: pitch at sound-start in Hz (min 40Hz, max 9999Hz) jumps after timel to frequency2
timel: duration for which freql is heard in sec., (min 0.01 s, max 99.99s).
frequency2: pitch of the sound in Hz (min 40Hz, max 9999Hz) jumps after time2 to frequencyl
time2: duration for which freq2 is heard in sec., (min 0.01 s, max gg.ggs).
ratio: duty-cycle of the square wave in percent, (min 1 %, max 50%)
repeat: number of repetitions of one frequency (min l x, max 9999x). 0000 corresponds to infinite
repetition.
Values in parenthesis ( ) example Post, A23
Type burst
Frequency: pitch of the sound in Hz (min 40Hz, max 9999Hz)
on-time: duration for which the sound is heard in sec., (min 00.01 s, max 99.99s).
off-time: duration of the pause in sec., (min 00.01 s, max 99.99s).
Ratio: duty-cycle of the square wave in percent, (min. 1 %, max. 50%)
repeat: number of repetitions of the sound (min 1 x, max 9999x).
0000 corresponds to infinite repetition.
Values in parenthesis ( ), example ship2, A31
19