List Of Factory Preset Sequences - Dynacord DMM 4650 Owner's Manual

List of factory preset sequences

Sequence Nummer
S 20
Step Command Parameter
1: Break
2: End
Sequence Numner
S 21
Step Command Parameter
1: Out
2: wt In Al High
3: Out
4: Out
5: Out
6: Out
7: Sum=
8: DMM=
9: Start
10: wt
ll: End
Sequence Nummer
S 22
Step Command Parameter
1: Out
2: wt In Al High
3: Out
4: Out
5: Out
6: Out
7: Sum=
8: DMM=
9: Start
10: wt
ll: End
Title
"stop all"
Stops all running sequences
Description: Stops all running sequences with low priorities (all
factory presets). Upon completion the DMM 4650 returns to the
stabd-by mpde.
Title
"Alarmtxt"
Start alarm text (message 00) once
Al set Description: Turns the sound reinforcement system on (relay Al)
and waits for acknowledgment (input Al = system ready). When
B4 car the system is ready, the output B4 (music program off) is opened
B2 set and B2, B3 (mandatory reception E, D) is closed. After closing
B3 set the signaling contact (A2 = alarm text running) the audio controls
A2 set are set to alarm text priority. The alarm text (MOO) is given out.
off After the transmission of the message is completed, the se-
-2dB quence is finished and the device returns to the stand-by mode,
m 00 i. e. all line and relay contact settings re-enter the status, prior to
Audio the start of the sequence.
Title
"DIN-Airm"
Start continuous DIN alarm (siren 1200 Hz - 500 Hz, per second
At set
Description: Turns the sound reinforcement system on (relay Al)
E4 cir and waits for acknowledgment (input Al = system ready). When
B2 set the system is ready, the output B4 (music program off) is opened
B3 set and B2, B3 (mandatory reception E, D) is closed. After closing
A3 set the signaling contact (A3 = alarm signal running) the audio
off controls are set to alarm text priority. The alarm signal (A20) is
-5dB outputted and runs continuously until it is stopped by a sequence
A 20 with a higher priority (e.g. S20). The control of the settings and
Audio relay contacts is taken over by the stop sequence and upon
completion the DMM 4650 returns to stand-by mode.
Priority
99
Priority
97
Priority
93
37
Stopp trigger
off
Stopp trigger
off
Stopp trigger
off