Table of Contents
Advertisement
Updating Software
Via XMODEM
Select U
menu. A new menu displays, prompting you to start the transfer.
Once you select S
from your terminal menu program (the XMODEM utility is
available under most terminal programs). If you wish to cancel a
transfer in progress, press
This function is only available when updating the software through the
CRAFT
From a TFTP Server
Select U
U
address and file name of the file you want to download to the unit.
Once this information is entered, select S
Resetting the System
The system must be manually reset after downloading new
software in order for the unit to recognize the change. This helps
prevent unintentional service disruption. Select 4-S
from the U
choose to immediately reset the unit, or you can schedule a delayed
reset for a time when service will be less affected.
To schedule a delayed reset, select S
number of hours you want to elapse before the reset takes place.
Once a value is entered, the C
appears, along with a reset countdown clock.
61200290L1-1
FLASH
PDATE
TART
port.
FLASH
PDATE
menu. A new menu displays, allowing you to enter the IP
TILITIES
menu to reset the unit. From this menu, you can
TILITIES
MX2800 User Manual
XMODEM from the U
SOFTWARE VIA
from this menu, start the XMODEM transfer
-
three times.
Ctrl
x
TFTP
SOFTWARE FROM
TART
CHEDULE
S
ANCEL
CHEDULED
Chapter 3. Configuration
TILITIES
from the
SERVER
/S
T
.
TOP
RANSFER
R
YSTEM
ESET
R
T
. Enter the
ESET
IME
R
option
ESET
3-29
Advertisement
Table of Contents
