IP Security
Enable or disable the IP S
accepts management commands and Telnet sessions from the IP
addresses entered into the IP H
IP Hosts
Enter up to 16 IP addresses of management stations from which the
unit should accept management commands. These addresses are
only applicable if IP S
Date & Time
Enter date and time information. Enter the month, date, and year
separated by forward slashes (02/23/00). Enter the time in military
time separated by colons (13:15:25).
Miscellaneous
Equipment Identification
These fields allow you to store information that identifies the unit.
Information provided for the far-end is read-only. Local informa-
tion is read/write from this menu.
61200290L1-1
option. If enabled, the unit
ECURITY
OSTS
is enabled (see previous section).
ECURITY
Figure 3-16. Equipment Identification Menu
MX2800 User Manual
Chapter 3. Configuration
fields.
3-25