Chapter 6. Utility Menu
Setting the Unit Identification
Unit ID menu
tween 2 and 999. The number 1 is reserved for the PC.
Pressing Enter records the Unit ID number and establishes its availabil-
ity for operation by remote control. The unit proceeds to the
Set Control Port
No Unit ID Desired
Without entering any numbers at the
Pressing Enter with no Unit ID recorded establishes the unit as unable
to be operated by remote control.
Software Revision (Software Rev)
This menu provides access to the display of the current software revi-
sion level loaded into the base unit controller. This information is re-
quired when requesting assistance from ADTRAN Customer Service or
when updates are needed.
Use Cancel to exit.
This menu provides access to the display of the current software infor-
mation for each port installed in the unit. This information is required
when requesting assistance from ADTRAN customer service or when
updates are needed.
ENET Address (600e only)
Displays the Ethernet MAC address for the 10BaseT port.
Reserved for factory use.
(item 4) under the
TSU 600 User Manual
, enter any value be-
prompt, press Enter.