Telnet; Interface Option Cards - ADTRAN T3SU 300 User Manual

A multiport dsu/csu (data service unit/channel service unit) that provides access to t3 services
Hide thumbs Also See for T3SU 300:
Table of Contents

Advertisement

(LAN) port. The T3SU 300 supports the MIB-II standard, RFC 1213,
and the ADTRAN Enterprise Specific MIB.
MIB files are available from ADTRAN in the support section of the ADT-
RAN web page at www.adtran.com.
The term SNMP broadly refers to the message protocols used to
exchange information between the network management system
(NMS) and the managed devices, as well as to the structure of
device management databases. SNMP has three basic components:
Network Manager
Control programs that collect, control, and present data pertinent to
the operation of the network devices. These programs reside on a
network management station.
Agent
Control program that resides in every network device. This
program responds to queries and commands from the network
manager, returns requested information or invokes configuration
changes initiated by the manager, and sends unsolicited traps to the
manager.
MIB
Industry standard presentation of all status and configuration
parameters supported by a network device.

TELNET

TELNET provides a password-protected, remote login facility to
the T3SU 300 that allows a remote user to control the T3SU 300
through the terminal menus. Only one TELNET session may be
active at a time.

INTERFACE OPTION CARDS

Optional interface cards may be purchased to equip the T3SU 300
with up to three additional ports. HSSI, V.35, and Quad DSX-1
interface cards are available.
61200217L1-1
T3SU 300 User Manual
Chapter 1. Introduction
1-3

Advertisement

Table of Contents
loading

Table of Contents