Using Scantag - Muratec MFX-2550 Guide Manual

4
Set the document size using the numeric keys or [+] and [-], and press [Enter].
When entering with the numeric keys, press the document size entry box.
5
Press [Enter].
6
Press <Start>.
The front of the document is scanned.
7
Turn the document over, and press <Start>.
The back of the document is scanned.
8
If you want to scan another document, load the document, and repeat steps 6
and 7.
9
When you have finished scanning all the documents, press [Complete].

Using ScanTag

The ScanTag feature allows you to enter tag (metadata indicating the attributes and
processing method of the copy job) and send it automatically to a network computer.
Note
Set ScanTag before using this function. For details, refer to Chapter 3, "Setting
ScanTag" in the OfficeBridge Guide.
1
Load the document, and press <Copy>.
2
Press [Advanced].
Advanced Copy Functions
1
2
2-19