Scanning On The Basic View - Muratec MFX-2590 User Manual

3
Connect the USB memory to the machine.
4
Press <Start>.
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press [Next
Doc]. To finish scanning, press [Complete].
• When the message "Scan Ready" is displayed on the screen, remove the USB memory.

Scanning on the Basic View

The basic view enables you to transmit a scanned document to an e-mail address
registered in advance, without worrying about any complicated functions.
For details, refer to the Scanner and Fax Guide.
1
Load the document, and press <Scan>.
For details on loading documents, refer to
2
Press <Basic/Advanced View>.
If the Basic view is already displayed, this operation is not required.
2-18 Scanning
"Loading Documents". (See page 1-36.)