Other Examples - Lantronix I/O 2100 User Manual

Detect fluid levels (float sensor connected to the IntelliBox's digital input)
 At low level, the IntelliBox triggers its relay to start a fluid pump. If the fluid lever is
abnormally low, the IntelliBox sends an email indicating the problem and the action
taken.
 At high level, IntelliBox triggers its relay to stop a fluid pump or open a valve to
release the fluid. If the fluid level is abnormally high, the IntelliBox sends an email
indicating the problem and the action taken.
Detect pressure (using a digital pressure sensor connected to the IntelliBox digital
input)
 Shuts off the valve or opens an emergency valve when it detects high pressure.
 Turns off a pump or motor.
 Notifies the user by email.
Monitor a PLC (connected to the IntelliBox's serial port)
 Queries the device.
 Sends reports by email and RSS Feed (monitor using an RSS client or a web
browser).

Scans for specific data. When the IntelliBox detects the data, it can automatically:
o
o
o
o

Other Examples

Security

Controls a camera using proximity sensors (e.g., zoom, pan, and rotate).
Security and Theft Prevention
 Monitors an attached device.
 If the device disconnects, sends an email or triggers an alarm (for example).
HVAC Systems
 Preemptively notifies the user of equipment failure.
 Initiates emergency shutdown or startup.
 Automatically reports HVAC status (email with attached data).
 Performs consolidated monitoring of many HVAC systems (RSS feed to a web
browser).
IntelliBox-I/O 2100 User Guide
Reconfigure the attached device
Soft reboot the attached device (through the serial port)
Hard reboot the attached device (using the relay)
Trigger an alarm (using the relay)
3: EventTrak
25