Protocol Support; Figure 2-1. Application Examples - Lantronix UDS200 User Manual

Introduction
Note:
tunneling or for use with the Com Port Redirector, access the UDS
Configuration Tutorials using Web Manager. (See

Protocol Support

The UDS200 uses the Internet Protocol (IP) for network communications and the
Transmission Control Protocol (TCP) to assure that no data is lost or duplicated, and
everything sent to the connection arrives correctly at the target.
Other protocols supported are:

Figure 2-1. Application Examples

For step-by-step instructions on configuring the UDS for serial
ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for
network communications.
TCP, UDP, and Telnet for connections to the serial port.
TFTP for firmware updates.
IP for addressing, routing, and data-block handling over the network.
User Datagram Protocol (UDP) for typical datagram applications in which
devices interact with other devices without maintaining a point-to-point
connection.
Accessing Web Manager.)
10
UDS200 User Guide