Maintenance - Bowflex TreadClimber TC10 Owner's Manual

Maintenance

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is
required to do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure
that regular maintenance is done. Worn or damaged components must be repaired or replaced
immediately. Only manufacturer supplied components can be used to maintain and repair the equipment.
the power cord from the wall outlet and/or the machine and wait 5 minutes before cleaning, maintaining or
repairing the machine. Place the power cord in a secure location.
Daily:
Weekly:
Monthly:
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep
30
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug
Before each use, inspect for loose, broken, damaged, or worn parts. Do not use the machine if any
of these conditions exist. Use a dry cloth to wipe off any perspiration after each use.
Check for smooth roller operation. Clean the machine to remove dust, dirt, or grime. Clean the top
of the belt with a slightly damp, soapy cloth and wipe carefully and thoroughly with a dry cloth. Do
not let any liquid get below the belts or into the Base Frame.
Make sure all bolts and screws are tight. Tighten if necessary.
the Console free of moisture.