Bowflex TreadClimber TC10 Owner's Manual page 39

Condition/Problem
Belts stop turning while in use
Console displays "C", "S", or "H"
with a number
Console displays "LUbE" code
Things to Check
Safety key
Motor overload
Outlet
Console
Belt lubrication
Solution
Plug Safety Key into Console (See Safety Key
(Emergency Stop Procedures) in Features section).
Unit may be overloaded and drawing too much
current, causing unit to shut power down to
protect motor. Consult belt lubrication schedule
to determine if belts need lubrication, check
walking belt tension, and restart unit.
Outlet may not have enough power available
for the machine due to other devices on same
circuit. Remove any devices from power circuit
and restart machine.
Cycle power off and on to clear the error. If
issue recurs be sure to note the display code
and contact Customer Service for further as-
sistance.
Consult lubrication schedule and apply if neces-
sary. Push START button.
Troubleshooting
39