Maintenance - Bowflex SelectTech 2080 Assembly & Owners Manual

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be replaced immediately or the equipment removed from service
until the repair is made. Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada,
contact Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.
The Bowflex SelectTech Barbell is a very low maintenance product. However, there are steps that you should take to keep the product
™ ™
performing and looking its very best.
1. Should your SelectTech
with warm water and a small amount of mild soap. Wipe dry with a separate cloth.
2. The SelectTech Barbell is internally lubricated and will not require further internal lubrication. The contact between weight plates and
™
selection mechanism is not lubricated but has naturally low friction. This generally will not require any lubrication. Should you feel it
necessary to lubricate the weight plates and/or selection mechanism, use only a 100% silicon lubricant.
Do not use any solvents, harsh detergents, chemicals or bleach on this product − doing so may damage the materials,
resulting in degradation of the product's performance or strength.
Do not attempt to disassemble the barbell/curl bar handle or base assembly. These items are not designed to be user
serviced. Doing so will void the manufacturers warranty. Contact Customer Service (if inside US/Canada) or your local
distributor (if outside US/Canada).
Barbell handle assembly, plates or base become soiled you may clean them with a cloth lightly dampened
™
13
Owner's Manual

Maintenance