Brother MFC-490CW User Manual page 168

Level1 Level2
Network Wired LAN
(Continued) (Continued)
WLAN
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
156
Level3 Level4
TCP/IP WINS Config
(Continued)
WINS Server
DNS Server
APIPA
—
Ethernet
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Options Descriptions
Chooses the
Auto*
WINS
Static
configuration
mode.
Specifies the IP
(Primary)
address of the
000.000.000.000
primary or
(Secondary)
secondary
000.000.000.000
server.
Specifies the IP
(Primary)
address of the
000.000.000.000
primary or
(Secondary)
secondary
000.000.000.000
server.
Automatically
On*
allocates the IP
Off
address from the
link-local address
range.
Chooses the
Auto*
Ethernet link
100B-FD
mode.
100B-HD
10B-FD
10B-HD
Chooses the
Auto*
BOOT method
Static
that best suits
your needs.
RARP
BOOTP
DHCP
[000-255]. Enter the IP
address.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the
Gateway
[000-255].
address.
[000-255].
[000-255]