Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-490CW User Manual

5

Sending a Fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Fax Resolution
Contrast Contrast
Speed Dial Speed Dial
Outgoing Call Outgoing Call
FAX
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 34.)
Contrast (See page 33.)
Speed Dial (See page 59.)
Outgoing Call (See page 60.)
Caller ID hist. (See page 60.)
Broadcasting (See page 32.)
Delayed Fax (See page 35.)
Batch TX (See page 35.)
Real Time TX (See page 34.)
Polled TX (See page 70.)
Polling RX (See page 68.)
Overseas Mode (See page 35.)
Glass ScanSize (See page 31.)
Set New Default (See page 36.)
Factory Reset (See page 36.)
When the option you want is highlighted,
press OK.
30
5
Standard
Auto Auto
Fax Press Start

Faxing from the ADF

a
Press (Fax).
b
Place the document face down in the
ADF. (See Using the ADF on page 19.)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
5
5