How To Change The File Name; How To Set A New Default - Brother MFC-490CW User Manual

e
Do one of the following:
To change the quality, press a or b to
choose Quality.
Go to step f.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
f
Press d or c to choose
Color 150 dpi, Color 300 dpi,
Color 600 dpi, B/W 200x100 dpi
or B/W 200 dpi.
Press OK.
g
Do one of the following:
To change the file type, go to step h.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
h
Press a or b to choose File Type.
Press d or c to choose JPEG, PDF or
TIFF.
Press OK.
Note
• If you chose colour in the resolution
setting, you cannot choose TIFF.
• If you chose monochrome in the resolution
setting, you cannot choose JPEG.
i
Do one of the following:
To change the file name, go to
step j.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
Printing photos from a memory card or USB Flash memory drive
j
Note
Press Clear/Back to delete the current
name.
k

How to change the file name

You can change the file name.
a
b
c
d

How to set a new default

You can set your own default setting.
a
b
c
d
The file name is set automatically
however, you can set a name of your
choice using the dial pad.
Press a or b to choose File Name.
Enter the new name. (See Entering Text
on page 169.)
You can only change the first
6 characters.
Press OK.
Press Mono Start or Colour Start.
Press (Scan).
Press a or b to choose
Scan to Media.
Press OK.
Press a or b to choose File Name.
Enter the new name using the dial pad.
You can only change the first 6 digits.
(See Entering Text on page 169.)
Press (Scan).
Press a or b to choose
Scan to Media.
Press OK.
Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
Press Stop/Exit.
12
12
12
99