Loading Documents; Using The Adf; Using The Scanner Glass - Brother MFC-490CW User Manual

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
Recommended environment
Temperature: 20° C to 30° C
Humidity: 50% to 70%
Paper:
80 gsm A4
Document Sizes Supported
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight:
64 to 90 gsm
How to load documents
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric with the ADF. Instead use the
scanner glass.
Loading paper and documents
Make sure documents written with ink are
completely dry.
2
a
Unfold the ADF Document Output
Support Flap (1).
b
Fan the pages well.
c
Place your documents, face down, top
2
edge first in the ADF until you feel them
touch the feed roller.
d
Adjust the paper guides (2) to fit the
width of your documents.
2
2
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
2

Using the scanner glass

You can use the scanner glass to fax, copy or
scan pages of a book one page at a time.
Document Sizes Supported
Length:
Width:
Weight:
2
1
Up to 297 mm
Up to 215.9 mm
Up to 2 kg
2
2
2
19