Photocapture Center™ Print Settings - Brother MFC-490CW User Manual

PhotoCapture Center™ print settings
You can change the print settings temporarily.
The machine returns to its default settings after 3 minutes, or if the Mode Timer returns the
machine to Fax mode. (See Mode Timer on page 22.)
Note
You can save the print settings you use most often by setting them as the default. (See Setting
your changes as a new default on page 97.)
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Enhance Photos, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
Menu Selections
Print Quality
(Not available for
DPOF printing)
Paper Type
Paper Size
Brightness
(Not available when
Enhance Photos is
chosen)
Contrast
(Not available when
Enhance Photos is
chosen)
Printing photos from a memory card or USB Flash memory drive
Print Setting Print Setting
Print Quality
Paper Type Paper ype
Paper Size Paper Size
Print Size Print Size
Brightness Brightness
PHOTO
Options 1
Normal/Photo
Plain Paper/Inkjet Paper/
Brother BP71/Other Glossy
10x15cm/13x18cm/A4/Letter
Dark Light
1
0001 0001
Photo
Other Glossy Other Glossy
10x15cm 10x15cm
Max. Size Max. Size
0
Print Press Start
Options 2
—
—
(When A4 or Letter is chosen)
8 x 10cm/ 9 x 13cm/
10 x 15cm/13 x 18cm/
15 x 20cm/Max. Size
—
—
12
Page
94
94
95
12
95
95
93