Dialling And Storing Numbers; How To Dial; Manual Dialling; Speed Dialling - Brother MFC-490CW User Manual

8

Dialling and storing numbers

How to Dial

Manual dialling

Press all of the digits of the fax or telephone
number.

Speed Dialling

a
Press (Speed Dial).
You can also choose Speed Dial by
pressing (Fax).
b
Press a or b to choose Search.
Press OK.
c
Press the two-digit Speed Dial number.
(See Storing Speed Dial numbers
on page 61.)
d
If you have two numbers in the location,
press a or b to choose the number you
want to call.
Press OK.
Note
If the LCD shows Not Registered
when you enter or search a Speed Dial
number, a number has not been stored at
this location.

Search

8
You can search for names you have stored in
the Speed Dial memory.
8
a
Press (Speed Dial).
You can also choose Speed Dial by
pressing
b
Press a or b to choose Search.
Press OK.
c
Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
Note
• Press l to make the LCD font size larger.
8
• Press # to make the LCD font size smaller.
d
If you chose Alphabetical Order in
step c, use the dial pad to enter the first
letter of the name, and then press a or b
to choose the name and number you
want to call.
Press OK.

Fax Redial

If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to a number
you recently dialled, you can press
Redial/Pause and choose one of the last
30 numbers from the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a
Press Redial/Pause.
(Fax).
59
8
8
8
8