Making Copies; How To Copy; Entering Copy Mode; Making A Single Copy - Brother MFC-490CW User Manual

11

Making copies

How to copy

Entering Copy mode

When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
01
1
Quality
Enlarge/Reduce Enlarge/Reduce
Ratio: Ratio:
Paper Paper Type ype
COPY
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 73.)
Enlarge/Reduce (See page 74.)
Paper Type (See page 77.)
Paper Size (See page 77.)
Brightness (See page 76.)
Contrast (See page 76.)
Stack/Sort (See page 76.)
Page Layout (See page 74.)
Book Copy (See page 77.)
Watermark Copy (See page 78.)
Set New Default (See page 79.)
Factory Reset (See page 79.)
When the option you want is highlighted,
press OK.
72
11
11
Normal
100% 100%
Plain Paper Plain Paper
Copy Press Start
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 22.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.

Making a single copy

a
Press (Copy).
b
Load your document.
(See Loading documents on page 19.)
c
Press Mono Start for B&W copy or
Colour Start for colour copy.

Making multiple copies

You can make up to 99 copies in one print run.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 19.)
c
Enter the number of copies you want.
d
Press Mono Start for B&W copy or
Colour Start for colour copy.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 76.)

Stop copying

To stop copying, press Stop/Exit.
11
11
11
11